Support

FAQ

June 5, 2024

Calibrate ColorChecker Studio (Xrite i1Studio)

Calibrate ColorChecker Studio replaces the X-Rite i1Studio (EOSTUDIO)

  • M2 measurement Conditions (UV cut)
  • Spectral reporting: 10 nm, between 380 nm, and 730 nm
  • Aperture 6 mm
  • Max Luminance measurements 1000 nits
  • Short Term Repeatability Emissive x, y: ±0.002 typical (5000K @ 80 cd/m²)
  • Short Term Repeatability Reflective 0.1ΔE*2000 (D50, 2°) typical, mean value of 10 measurements on white
  • Inter-instrument agreement: 0.6ΔE*2000 average, max. 1.5ΔE*2000 max. (deviation from X-Rite i1Studio manufacturing standard at a temperature of 23°C for single measurement mode on 12 BCRA tiles D50, 2°)
  • Light Source White LED

Modes:

  • Spot Color Measurements (Color Inspector)
  • Scan Control Strips (Print Inspector)
  • Lighting Measurements (Lighting Inspector)
  • Display Calibration and profiling (Display Inspector)

Important Instrument Limitations:

  • Patch size 20 x 29 mm + 2 mm separation bar
  • max 15 patches in a single scanning row (328 mm)
  • No OBAs Index – instrument can't quantify the presence of optical brighteners
  • No Fluorescence Index/Fluorescent Effect evaluation

Please note:

This instrument is dedicated to Enthusiasts and Professional Photographers who print, Graphic/Packaging/Industrial/Interior Designers, and Stylists. It supported the M2 measurement condition only – which might be a limitation for some professional usage areas.  

 

Related Topics

Contact ChromaChecker Support

Additional information and Support Form is available for logged users.